Professional easy to use volt detector, designed to detect AC voltage from 12V - 10000V. When the probe is placed near the AC voltage the signal indicator will flash red and beeper will sound.
A rugged high-performing, auto-ranging multimeter with a built-in temperature function. Also features an input jack LED indicator ensuring correct connection of leads. This device can measure voltage, electrical current, resistance, capacitance, frequency as well as measuring NCV.
Regin Pocket Infra Red Thermometer REGXE65 Non-contact temperature measurement Laser targeting Backlit LCD Display Measurement Range: -30°C to +260°C Optical...
REGX75 - Sniffa Plus
Sniffa Plus Gas Leak Detector Detects Methane, Natural Gas, Butane, Propane and most other combustible gases
Quick and Precise
400mm long flexible probe.
Supplied with protective carry case
One hand operation.
Rechargeable battery - Comes with UK 3 pin charger
Specification:
Visual Alert
5 Red LEDs
Audible Alert (85db)
Loud Audible Ticking Rate
Vibration Alert
Standard
Sensitivity
<50ppm (methane)
Response Time
<2 Seconds
Range
0-10000ppm
Sensitivty Level
(Methane) (HIGH)
5 Levels:
100/400/700/1000/>1000ppm
Sensitivty Level
(Methane) (LOW)
5 Levels:
1000/4000/7000/10000/>10000ppm
Warm Up Calibration
Automatic (Self Calibrating)
Warm Up Time
50 Seconds
Batteries
Visual Alert
Low Battery Status
Low and High Sensitivity LED Solid
Sensor Connection
Plug-In
Probe
Flexible 400mm (16")
Measurable Gases
Methane, Natural Gas, Hydrogen, Butane, Propane, Carbon Monoxide and Many more. See instructions for further info.
REGK30 - Pressure Vessel Pump
The REGK30 is a hand pump for pressurising pressure vessels. It features an ex- tended 3 metre long hose which helps access difficult to reach areas. The pump is freestanding and has a large, easy to read 0 - 5.1 bar (0 - 75 psi) barrel mounted gauge.
The first choice and best selling pump for all engineers.
For pressurising expansion vessels.
3 metre extended hose helps access difficult to reach pressure vessels.
REGU35 - Premier 45 Manometer
The one and only 'Regin Premier Gauge'. Tried and tested by thousands of heating engineers all over the U.K for over 30 years and considered the gold standard of gas pressure testing through traditional means. This also means no expensive calibration costs every year as it works through gravitational readings.
A solid acrylic gauge in a tough metal casing.
Measures to 18in.w.g. or 45 mbar.
Easy zero adjustment and a clear accurate scale.
Blue fluid for ease of reading in poorly lit locations.
Trap chambers reduce the possibility of fluid loss through spillage or overpressure.
Hanging slot and strap.
Overall length - approx. 18” (450mm).
Supplied in a nylon protective bag.
Please note: use only 1.88 SG fluid (REGU70).
Spares available.
IGEM/UP/1B EDITION 3+A: 2012 (With Amends October 2012) states that all gauges can be used for gas tests including the Regin Premier specific gravity gauge.
