The REGU33 is a smaller size compared to the bigger brothers such as the REGU35 and REGU40 Gauges
Includes strong magnets on the back for easy storage (even with the bag on) and when taking measurements
Suitable for domestic gas - Up to 30millibar pressure gauge
Ideal to fit in smaller maintenance tool kits
Less fluid required to fill the gauge
Dimensions: H: 36cm - W: 6.3cm - D: 1.8cm
IGEM/UP/1B EDITION 3+A: 2012 (With Amends October 2012) states that all gauges can be used for gas tests including the Regin Premier specific gravity gauge.
Regin Pocket Infra Red Thermometer REGXE65 Non-contact temperature measurement Laser targeting Backlit LCD Display Measurement Range: -30°C to +260°C Optical...
Regin Premier Gauge Fluid - (1.88 S.G. 5ml) REGU35/REGU40/REGU33 only. 5ml Fluid has a specific gravity of 1.88 S.G Exclusively for use in Regin Premier Gauges (REGU35, REGU40 & REGU33)
REGX75 - Sniffa Plus
Sniffa Plus Gas Leak Detector Detects Methane, Natural Gas, Butane, Propane and most other combustible gases
Quick and Precise
400mm long flexible probe.
Supplied with protective carry case
One hand operation.
Rechargeable battery - Comes with UK 3 pin charger
Specification:
Visual Alert
5 Red LEDs
Audible Alert (85db)
Loud Audible Ticking Rate
Vibration Alert
Standard
Sensitivity
<50ppm (methane)
Response Time
<2 Seconds
Range
0-10000ppm
Sensitivty Level
(Methane) (HIGH)
5 Levels:
100/400/700/1000/>1000ppm
Sensitivty Level
(Methane) (LOW)
5 Levels:
1000/4000/7000/10000/>10000ppm
Warm Up Calibration
Automatic (Self Calibrating)
Warm Up Time
50 Seconds
Batteries
Visual Alert
Low Battery Status
Low and High Sensitivity LED Solid
Sensor Connection
Plug-In
Probe
Flexible 400mm (16")
Measurable Gases
Methane, Natural Gas, Hydrogen, Butane, Propane, Carbon Monoxide and Many more. See instructions for further info.
REGK30 - Pressure Vessel Pump
The REGK30 is a hand pump for pressurising pressure vessels. It features an ex- tended 3 metre long hose which helps access difficult to reach areas. The pump is freestanding and has a large, easy to read 0 - 5.1 bar (0 - 75 psi) barrel mounted gauge.
The first choice and best selling pump for all engineers.
For pressurising expansion vessels.
3 metre extended hose helps access difficult to reach pressure vessels.
10 per pack.
For wires 0.5 - 1.5mm.
High Quality pre-insulated crimp terminals.
Flared entry for easy location of cable.
Use with Ratchet Crimping Tool REGB80.
15 per pack.
For wires 0.5 - 1.5mm.
High Quality pre-insulated crimp terminals.
Flared entry for easy location of cable.
Use with Ratchet Crimping Tool REGB80.
REGU35 - Premier 45 Manometer
The one and only 'Regin Premier Gauge'. Tried and tested by thousands of heating engineers all over the U.K for over 30 years and considered the gold standard of gas pressure testing through traditional means. This also means no expensive calibration costs every year as it works through gravitational readings.
A solid acrylic gauge in a tough metal casing.
Measures to 18in.w.g. or 45 mbar.
Easy zero adjustment and a clear accurate scale.
Blue fluid for ease of reading in poorly lit locations.
Trap chambers reduce the possibility of fluid loss through spillage or overpressure.
Hanging slot and strap.
Overall length - approx. 18” (450mm).
Supplied in a nylon protective bag.
Please note: use only 1.88 SG fluid (REGU70).
Spares available.
IGEM/UP/1B EDITION 3+A: 2012 (With Amends October 2012) states that all gauges can be used for gas tests including the Regin Premier specific gravity gauge.
The REGU33 is a smaller size compared to the bigger brothers such as the REGU35 and REGU40 Gauges
